Shodo’s heater was one of our SR-18 masonry heater cores with a large bell, a side heated bench chimney. Her heater was finished with clay brick. Patrick Sieben, a very talented mason from St. Paul MN drove down to help us build Shodo’s heater near...
The Simensen SR-18 Masonry heater with white oven and front heated bench was built up on Lake Vermilion MN. We finished the face of the heater with local banded taconite stone from the MN Iron Range, a custom cut piece of taconite hearth stone and a slate cap.
The Tietjens needed a large masonry stove for their 2,500s.f. log home that they were building. We built them one of our SR-22 Bell Heaters with a rear facing white oven and a heated bench on the back side of the heater along with domestic hot water heating. We...
SR-18 Cast Refractory core system with a black oven, hot water loop, heated bench and rear chimney. We traveled over by Montague MI to build this our cast refractory core system. The client and a local mason will finish the outside of the heater with brick at a...
We traveled down by Port Washington WI to build a Kakelugn or Swedish Tile stove. The client imported the tile stove from www.lindholm-kakelugnar.com in Sweden. The folks at Lindholm find old tile stoves that are going to be thrown away. The arrange to recycle the...