This is one of our SR-22HWO Hybrid masonry heater cores with a white oven being built. Our client wanted to be able to see the fire and be able to see and load the fire from 2 rooms so we designed a smaller door on the back side of the heater to facilitate...
This is the curing fire schedule that we recommend all of our clients use for curing a new masonry heater. You basically want to start out small with your fires and gradually add ~ 3-5# of wood per day. You are trying to slowly dry out all of the excess water from...
We traveled down to SW MN near Granite MN to teach a fast paced Masonry Heater Building Workshop for the Milan Village Arts School. http://milanvillageartsschool.org/ The hosts for the workshop, Waz & Scott both attended our Masonry Heater Building course at the...
SR-18 Cast Refractory core system with a black oven, hot water loop, heated bench and rear chimney. We traveled over by Montague MI to build this our cast refractory core system. The client and a local mason will finish the outside of the heater with brick at a...