Balas SR-18 masonry heating system with oval channels, a rear facing white oven and heated bench. Finished in fieldstone, brick, and stucco. Brick was finished with clay plaster.
We built this masonry mass stove down by Strum WI for one of Mark Morgans of www.bearpawconstruction.com clients. Mark is one of the most well versed green building contractors in the US. He teaches green building across the country and
Christensen SR-18 see-thru masonry heater Finished in Custom Alberene Soapstone with a 4 sided bench
Posted in 4-sided hearth, Custom masonry heater core, Heater Love, J Loop, masonry fireplace, Masonry Heater, Masonry heater core, see-thru firebox, Soapstone, SR-18 core, top vented masonry heater, wood box
We built this custom soapstone masonry heater for a client near Duluth MN. The Christensens loved one of the custom Tulikivi masonry heater designs that Ron Phil in MT designed but was way out of their budget. This is one
Culham SR-18 6-sided masonry heater with rear facing white oven and front heated bench. Finished with reclaimed brick and hand split local granite hearth.
Fearing SR-18 Corner Masonry Heater unit with black oven, hot water loop, & heated bench. Finished in brick and limestone hearth.
Posted in 6-sided masonry heater, Bakeoven, Black Oven, Brick masonry heater, Contraflow Heater, Corner masonry heater, heated bench, Hot Water, Masonry Heater, Masonry heater core, Masonry Heater Door, SR-18 core
The Fearing masonry heater was built down by St.Croix Falls, WI. We were replacing an existing inefficient wood stove with an efficient clean burning masonry mass stove. The owners wanted the masonry heater in the corner but did not want
Shodo’s heater was one of our SR-18 masonry heater cores with a large bell, a side heated bench chimney. Her heater was finished with clay brick. Patrick Sieben, a very talented mason from St. Paul MN drove down to help
The Simensen SR-18 Masonry heater with white oven and front heated bench was built up on Lake Vermilion MN. We finished the face of the heater with local banded taconite stone from the MN Iron Range, a custom cut piece
SR-18 Cast Refractory core system with a black oven, hot water loop, heated bench and rear chimney. We traveled over by Montague MI to build this our cast refractory core system. The client and a local mason will finish the
Miller SR-18 with white oven and front heated bench. Finished in MT ledgestone with NY bluestone hearthstones.
For the Miller project by Sarona WI we built our SR-18 masonry heater core system with our white oven and a front and side heated bench with the chimney on the side. The heater was finished with a 4″ solid
SR-18 5 sided corner masonry heater with a black oven. The black oven was built out of soapstone. This heater was finished with slate accents and a cut taconite stone facing.
Naylor SR-13 Finnish Contraflow Masonry Heater & SR-18 Russian Bell heater. Finished with 4″ CMU and clay plaster and whimsical thin fieldstone veneer